Mendini MCT-E+SD+PB Black Ebonite ABS Clarinet Package

All of our clarinets are tested at our factory and inspected again by skilled technicians at our Los Angeles distribution center prior to shipping. It is important to disassemble and thoroughly clean the clarinet after playing, then store it in its case. Use a small amount of cork grease on joints to help ease assembly of the clarinet and wipe off excess grease. Rinse your mouth after eating or drinking prior to playing. Always store the clarinet in its case when not in use to prevent damage. Avoid direct and extended exposure to sunlight, rain, heaters, and air conditioners. It is recommended to bring the clarinet to a skilled technician at least once a year for servicing.

First-time players are advised to seek assistance from an instructor. If an instructor is not available, follow the steps outlined below. Remove the clarinet from the case by lifting it from the edges, never by the keys. The compact clarinet stand is stored inside the clarinet bell. To assemble, unscrew the cap at the bottom of the stand, extend the legs, and screw the cap back on.

To attach the reed, moisten the thin end in your mouth or in a cup of water, remove the ligature from the mouthpiece, position the reed on the mouthpiece so the tip is just visible, slide the ligature over the reed and mouthpiece, adjust to fit, and tighten the ligature screws.

Lubricate all tenon-corks on the mouthpiece, upper and lower joints with the included cork-grease, applying an even coat. Gently attach the barrel to the upper joint, the bell to the lower joint, and the upper joint to the lower joint, pressing the large ring key to bring the upper bridge key up.

Pitch is affected by temperature, so warm up the clarinet before playing by blowing air through it. Use a chromatic tuner or piano to help tune the clarinet, adjusting the length of the barrel to the body as needed. The lower joint bridge key will slide under the upper joint bridge key, so be careful during assembly.

After playing, always insert the cleaning swab into the clarinet to remove moisture. Rub the outside of the mouthpiece with a soft cloth, then scrub the inside with a mouthpiece brush using lukewarm water and mild soap. Rinse thoroughly and dry with a soft cloth. Dry the pads by inserting cleaning pad paper between the pad and the tone hole, lightly pressing the key down and carefully pulling the paper away.

After each use, rub the outside of the clarinet with a polishing cloth to remove particles and fingerprints. Use a key brush once a week to remove dust or lint that accumulates around posts and springs, and under key rods. Use a pipe cleaner on hard-to-reach areas. Remove all moisture from tenons cork with gauze and apply small amounts of cork grease to maintain the quality of the cork and make mouthpiece assembly easy.

This complete set includes a case, mouthpiece, box of 10 reeds (2.5"), cork grease, a cleaning cloth, gloves, a pocketbook, a stand, and the clarinet itself. The instrument is super lightweight, adjustable, and portable, with a smooth, sleek finish and sturdy, nickel-plated keys. The included pocketbook provides tips and tricks for beginners.

product information: